ZULKIFLI MD YUSOF

Senior Lecturer

Department of Microelectronics and Computer Engineering,

Faculty of Electrical Engineering, University Teknologi Malaysia,

81310 UTM Johor Bahru, Johor.

Tel  : 07-553 5278  HP: 019 752 6774

Fax  : 07 -556 6272 

Email : zmdyusof@fke.utm.my

Gambar Zul 2010.JPG

AREAS OF SPECIALISATION AND RESEARCH INTERESTS:

Microlectronics, Placement & Route in VLSI Routing , Optimization Technique, Compression, Digital System Architecture.

ACADEMIC QUALIFICATION :

1993 : M.Sc. (Washington State Univesity, Pullman, USA) 

1991 : B.Sc.  (University of Arizona, Tucson, USA) 

ACADEMIC  AND OTHER RELEVANT APPOINTMENTS/EXPERIENCE:

Zulkifli bin Md Yusof is a Senior Lecturer at the Department of Microelectronics and Computer Engineering, Faculty of Electrical Engineering, UTM. He graduated from University of Arizona in Electrical Engineering in 1989 where he exposed to microelectronics field and involve in University of Arizona Network Transmission Line (UANTL)  Software Development team . He had been an  Engineer in Hitachi Semiconductor in Penang where one of his  responsiblity is to monitor and improve various type of assembly lines. Due to his exposure to semiconductor field he has been appointed as Asistant Lecturer in Universiti Teknologi Malaysia in Kuala Lumpur in 1989. Obtained his MSc in Electrical Engineering from Washington State Univrersity (WSU) in 1993. In WSU he had been working on semiconductor device modeling  and transport characteristic of wide bandgap material such as diamond. He was the Head of Microelectroincs Lab and  Head of Printed Circuit Board Lab in Faculty of Electrical Engineering and resource person to develop the Undergraduate Program  for Premier Politeknik in Pasir Gudang. He has led a few research on Compressed Memory Architecture, VLSI Routing and Optimization Technique. He has been supervised more than 70 undergraduate students.  He published 10 articles in Journal, 20 articles in conferences and co-authored 1 book. He has been appointed as Vice Chairman Persatuan Ibu Bapa dan Guru Sekolah Menengah Kebangsaan, Kangkar Pulai  , Johor 2011-2012 and Vice Chairman Surau Nurussalam, Taman Pulai Indah, Johor   2011-2013. He also a course coordinator for Digital Electronics  course  in  Undergraduate Program  and  VLSI Digital Design course in Undergraduate Development Skill Program with MDEC.

PROFESSIONAL AFFLIATION:

1.       Member, IEEE . (Member No.  92051057)

2.       Registered with Board of Engineers Malaysia (Reg No. 70264A)

ADMINISTRATIVE POSTS:

1.       Head of Printed Circuit Board Lab, (1994 – 1999)

2.       Head of Microelectronics Lab. (1996 - 1997)

3.       Coordinator Subject Digital Electronics (2007 – 2011)

CONSULTING AND INDUSTRIAL EXPERIENCE

1.       Coordinate Rakan Muda Program : Printed Circuit  Board Development April-June & August-September 1995

2.       Represent Biro Innovasi & Perundingan UTM  to Hong Kong institutional visit. 1996 ( 1 week)

3.       Represent Faculty to Toyama University , Japan and UTM exchange staff program 28 April – 27 May 1997.( 1 month)

4.       Coordinate  MDEC Undergraduate Skills Programme : VLSI Digital System Design course. (May & December  2007)

5.       Coordinate Microelectronic and Computer Engineering  Department  Research /Project Discussion session  in 2007

6.       Coordinate INTEL Elite Program : Technical and Softskill talks for electrical engineering students in 2007

7.       Faculty of Electrical Engineering , UTM representative  in the development of Undergraduate Program in 2015 for Department of  Electrical Engineering Politeknik Johor Bahru     since July 2011

TEACHING:

Undergraduate

1.       Microelectronics

2.       Electronic Computer Aided Design (ECAD)

3.       Very Large Scale Integrated Circuits (VLSI)

4.       Digital System Design

5.       Digital Electronics

6.       System Electronics

7.       Electronics Circuits

8.      Electronics Device

Postgraduate

1.       Special Topic in Advanced Electronic

Diploma

1.       Computer Engineering

2.       Electrical Engineering

3.       Microprocessor Motorola 6800

Short Course

1.     Printed Circuit  Board Development  

2.     VLSI Digital System Design course

RESEARCH: 

1. FRGS, Vot 78031 , Ministry of Higher Education : CAD Algorithm & Architecture in Physical Design System for Nano-scale VLSI Intergrated Circuits 2007, (Julai 2006 – Julai 2008) Researcher

2. eScience , Project No.: 01-01-06-SF0663 Vot 79361 : MOSTI : A Particle Swarm Optimization Approach For Vlsi Routing (April 2009 –October 2010 ) Project Leader, RM.106,100 

3. FRGS/1/10/SG/UTM/03/10 (ST). An Improved Vector Evaluated Particle Swarm Optimization (Vepso) To Achieve Good Quality Of Pareto Frontier For Multi-Objective Optimization (Mac 2010 – Feb. 2012) Researcher

4. Geran Penyelidikan Jangka Pendek UTM, The Study on the Contribution of Nearest Neighbour Thermodynamics Parameters to the DNA Sequences Generated by Ant Colony System (ACS) Algorithm ( May 2010 - November 2011 ) Project Leader, RM.20,000

5. Short Term Grant UTM , Machining Parameters Due to Servomechanism Influences Of A Die-Sinking Electrical Discharge Machining (EDM)… 2009 - 2010, Researcher, RM.20,000

6. FRGS/2/10/SG/UTM/02/24, A New Multi-State Particle Swarm Optimization For Discrete Combinatorial Optimization Problems, (January  2011  – December 2012) Project Leader, RM.67,800

7. Research University Grant (RUG) ,  A Two Step Particle Swarm Optimization Approach for VLSI Routing ( 01/04/2011 until 31/03/2012) Project Leader,  RM40,000

8. FRGS/2/10/SG/UTM/03/12, New Fitness Functions For Dna Sequence Design With Arbitrary Length (December  2010  – October 2012) Researcher, RM 61,600

 

PUBLICATION: 

 A)        Book

1.       Azli Yahya, Muhammad Arif Abdul Rahim, Zulkifli Md Yusof “ Digital Electronics “ Lampert Academic Publishing 2011. ISBN: 978-3-8454-7618-6

 B)     Journal

1.       Muhammad Faiz Mohamed Saaid, Zuwairie Ibrahim, Zulkifli Md Yusof, Junzo Watada, “Automation of a DNA Computing Readout Method based on Real-Time PCR Implemented on a LightCycler System” ICIC International,  Volume 6, Number 4, April 2010 

2.       Noor Khafifah KhalidZulkifli Md Yusof, Zuwairie Ibrahimi, “ Function Minimization in DNA Sequence Design Based On Binary Particle Swarm Optimization” Jurnal Teknologi Keluaran Khas (Fasa 21-28)Volume Number , December 2010

3.       Wan Khairunizam Wan Ahmad, Zuwairie Ibrahim, Zulkifli Md Yusof et al., Probability Distribution of Arm Trajectory for Motion Estimation and Gesture Recognition, Advanced Science Letters. December. 2011

4.       Jameel A.A. Mukred, Zuwairie Ibrahim, Zulkifli Md Yusof et al., A Binary Particle Swarm Optimization Approach to Optimize Assembly Sequence Planning, Advanced Science Letters. .December. 2011

5.       Ismail Ibrahim, Zuwairie Ibrahim, Zulkifli Md Yusof et al., An Improved Defect Classification Algorithm for Six Printing Defects and its Implementation on Real Printed Circuit Board Images, International Journal of Innovative Computing, Information, and Control. .December. 2011

6.       Ismail Ibrahim, Zuwairie Ibrahim, Zulkifli Md Yusof et al., An Image Registration Technique to Enhance PCB Inspection Algorithm with Real Images, ICIC Express Letters .December..2011

7.       Zulkifli Md. Yusof, Zuwairie Ibrahim, et al., A Two-Step Binary Particle Swarm Optimization Approach for Routing in VLSI, ICIC Express Letters.December. 2011

8.       Zuwairie Ibrahim, Zulkifli Md Yusof et al., DNA Sequence Design for DNA Computation based on Binary Particle Swarm Optimization, International Journal of Innovative Computing, Information, and Control March.2012

9.       Zuwairie Ibrahim, Noor Khafifah Khalid, Jameel Abdulla Ahmed Mukred, Salinda Buyamin, Kamal Khalil, Zulkifli Md. Yusof, Muhammad Faiz Mohamed Saaid, N. Mokhtar, and Andries P. Engelbrecht, A DNA Sequence Design for DNA Computation based on Binary Vector Evaluated Particle Swarm Optimization, International Journal of Unconventional Computing. March 2012

10.    Muhammad Faiz Mohamed Saaid, N. Mokhtar, Ismail Ibrahim, Shahdan Sudin, Mohd Saberi Mohamad, Zulkifli Md. Yusof, Jameel Abdulla Ahmed Mukred, Kamal Khalil, Zuwairie Ibrahim, and Junzo Watada, Automation of DNA Computing Readout Method Based on Real-Time PCR Implemented on DNA Engine Opticon 2 System, International Journal of Innovative Computing, Information, and Control, Vol. 8, No. 3, pp. 1-10 March 2012,.

C)   Conference

1.       M.A. Osman, Z.M.Yusof "Intervalley Diffusion in Diamond," Transactions Second International High Temperature Electronics Conference, Charlotte, N. Carolina, Vol. 2, pp. 97- 102, June 1994.

2.       Zulkifli M Yusof, David J Mulvaney, Jose L Nunez-Yanez and Vassillios A Chouliaras  “ Compressed Memory Core”, Electronic Systems and Control Division Research Mini Conference, Loughborough, pp.50-51, 25 September 2003

3.       Zulkifli Md Yusof , Mohamed Khalil-Hani, “System Level Modelling of Compressed Memory Architecture using systemC,”  Int. Conf. on Robotics, Vision, Information and Signal Processing (ROVISP 2007), USM, Penang, pp. 354 - 358, 28-30 Nov 2007

4.       Noor Khafifah Khalid, Tri Basuki Kurniawan, Zuwairie Ibrahim, Zulkifli Md Yusof, Marzuki Khalid, and Andries P. Engelbrecht, “A Model to Optimize DNA Sequences Based on Particle Swarm Optimization”, Asia International Conference on Modelling and Simulation, Kuala Lumpur, Malaysia, pp. 534-539 13-15 May 2008,

5.       Zulkifli Md Yusof, Mohamed Khalil-Hani, Nasir Shaikh-Husin, and Mohamed Nadzir Marsono, “Iterative RLC Models for Interconnect Delay Optimization in VLSI Routing Algorithm,”  The 6th Student Conference on Research and Development 26-27th November 2008

6.       Z. Md-Yusof, M. Khalil-Hani, M. N. Marsono and  N. Shaikh-Husin , “Optimizing Multi-Constraint VLSI Interconnect Routing”  12 th International Symposium on Integrated Circuits (ISIC 2009).14-16 Dec 2009…

7.       Asrul Adam, Amar Faiz Zainal Abidin, Zuwairie Ibrahim, Abdul Rashid Husain, Zulkifli Md Yusof and Ismail Ibrahim “A Particle Swarm Optimization Approach to Robotic Drill Route Optimization, pp.60-64 “4th Asia Modelling Symposium 2008, Kota Kinabalu.,26-28 May 2010.

8.       Z. Md.Yusof, C.-Y. Tan, A.-N. Wong, Z. Ibrahim, M. K. Hani and M. N. Marsono “Link-Fit and Lazy Fit Algorithms in Compressed Memory System, “4th Asia Modelling Symposium 2010, Kota Kinabalu.,26-28 May 2010.

9.       M. Nasir Ayob, Zulkifli Md Yusof, Asrul Adam, Amar Faiz Zainal Abidin, Ismail Ibrahim, Zuwairie Ibrahim, Shahdan Sudin, N. Shaikh-Husin, M. Khalil Hani, "A Particle Swarm Optimization Approach for Routing in VLSI," CICSYN, pp.49-53, 2010 2nd International Conference on Computational Intelligence, Communication Systems and Networks, 2010

10.   Mohd Hafiz Othman, Amar Faiz Zainal Abidin, Asrul Adam, Zulkili Md Yusof, Zuwairie Ibrahim, Seri Mastura Mustaza, Lai Yee Yang. “ A Binary Particle Swarm Optimization Approach For Routing in PCB Holes Drilling Process”. First International Conference on Robotic & Automation System (ICORAS 2011). International Training Centre TATIUC (ITC-TATIUC), Kemaman, Terengganu, Malaysia. 23-24 May 2011.

11.    Zulkifli Md. Yusof, Tan Zhe Hong, Amar Faiz Zainal Abidin, Mohammad Nazry Abdul Salam, Asrul Adam, Kamal Khalil, Jameel Abdulla Ahmed Mukred, N. Shaikh-Husin, and Zuwairie Ibrahim, “A Two-Step Binary Particle Swarm Optimization Approach for Routing in VLSI with Iterative RLC Delay Model”, Third International Conference on Computational Intelligence, Modeling and Simulation (CIMSim 2011). pp. 63-67, Langkawi, Malaysia, 20-23 September 2011.

12.   Ismail Ibrahim, Syed Abdul Rahman Syed Abu Bakar, Musa Mohd Mokji, Kamal Khalil, Zulkifli Md Yusof, Jameel Abdulla Ahmed Mukred, Zuwairie Ibrahim, Mohd Saberi Mohamad. “Performance Measurement of Thresholding Algorithms in Printed Circuit Board Inspection System”, Third International Conference on Computational Intelligence, Modeling and Simulation (CIMSim 2011). pp. 242-247, Langkawi, Malaysia, 20-23 September 2011

13.   Muhammad Salihin Sae al, Amar Faiz Zainal Abidin, Asrul Adam, Nur Anis Nordin, Zulkifli Md. Yusof and Zuwairie Ibrahim, “An Ant Colony System For Routing in PCB Holes Drilling Process”, Proceeding of the International Symposium on Innovative Management, Information & Production (IMIP 2011), pp. 292-298, Otaru, Japan, 8-10 October 2011.

14.   Ismail Ibrahim,Syed Abdul Rahman Syed Abu Bakar, Musa Mohd Mokji, Kamal Khalil, Zulkifli Md Yusof, Jameel Abdulla Ahmed Mukred, Mohd Saberi Mohamad And Zuwairie Ibrahim. “ A printed circuit board inspection system with defect classification capability “The International Symposium on Innovative Management, Information  & Production (IMIP 2011), pp. 351-357, Otaru, Japan, 8-10 October 2011.

15.   Zulkifli Md Yusof, Amar Faiz Zainal Abidin, Mohammad Nazry A.Salam, Kamal Khalil, Jameel Abdulla Ahmed Mukred, M. Khalil Hani And Zuwairie Ibrahim. A Binary Particle Swarm Optimization Approach For Buffer Insertion In Vlsi RoutingThe International Symposium on Innovative Management, Information & Production (IMIP 2011), pp.7-14, Otaru, Japan, 8-10 October 2011.

RESEARCH AWARDS & RECOGNITIONS :

1.       Bronze Medal PECIPTA 2009  :   PSO Ligo Project

2.       Bronze Medal INATEX 2010   :   PSO : A Routing Software For PCB Hole Drilling

3.       Bronze Medal INATEX 2010   : Finger- Vein Biometrics For Secure Access Control Of Bank Safe- Deposit Boxes

4.       Bronze Medal PECIPTA 2011 :   PSO : A Routing Software For PCB Hole Drilling

 

CO-CURRICULAR AND PROFESSIONAL ACTIVITIES

1. Secreatary of Surau Taman Senai Utama, 1998 – 2001

2. Member of Faculty of  Electrical Engineering Ping Pong team.1998 – till now

3. Member of Faculty of  Electrical Engineering Football team.1998 – 2000

4. AJK Biro Sosial Masyarakat Melayu Loughborough 2002

5. Member of Faculty of  Electrical Engineering Veteren Football team.2007 – 2009

6. Member of Jawatankuasa Info@FKE.  2007 – till now

7. Track Chair for Asia International Conference on Modelling and Simulation May 2008 (AMS2008)

8. Naib Pengerusi Kejiranan Kluster, Taman Pulai Indah, 2008.

9. Naib Pengerusi Kejiranan Kluster, Taman Pulai Indah, 2009

10. Naib Pengerusi Kejiranan Kluster, Taman Pulai Indah, 2010.

11. AJK  PIBG Sekolah. Kebangsaan Kangkar Pulai 2, 2009-2010

12. AJK  PIBG Sekolah. Kebangsaan Kangkar Pulai 2, 2010-2011

13. AJK  PIBG Sekolah. Menengah Kangkar Pulai, 2010 2011

14. Timbalan Yang DiPertua  PIBG Sekolah. Menengah Kangkar Pulai, 2011-2012

15. Timbalan Pengerusi Surau Nurussalam 2011-2013

16. Session Chair ISMS 2011, Second International conference on  Intelligence System, Modeling and Simulation, Kuala Lumpur, 20 January 2011

17. Session Chair AMS 2011, Fifth Asia International conference on  Mathematical Modeling and Computer Simulation, Kuala Lumpur. 24 May 2011

18. Session Chair CIMSIM 2011, Third International conference on  Computational Intelligence, Modeling and Simulation, Langkawi. 20 - 22 September 2011


COURSES AND SEMINAR ATTENDED

1.     Kursus “ Current Trends in Wafer Processing Technology and Related Faiulre Mechanism,

2.  MIMOS, PWTC  19 – 27 Julai 1990

3.    2nd International Microelectronics & System  Conference ’91, MIMOS, PWTC  23 – 26 Julai 1991

4.     Kursus “ VLSI Design “, FKE, UTM, 15 – 19 Julai 1991

5.     Autologic Training , Mentographic , 24 – 26 September 1991

6.     Cathedral – II : DSP Silicon Compiler, MIMOS, 29 – 31 Oktober 1991.

7.     Kursus Bina Negara, Biro Tatanegara, Langkawi, 9 – 13 April 1994

8.     VLSI  BiCMOS Digital Circuit, MIMOS, 4 – 5 Julai 1994

9.     7th  International Conference on Microelectronics – ICM ’95, MIMOS 19 – 21 Dis. 1995

10.  Kursus Pengendalian CNC 020 Mesin dan PCB , UKM 3 -7 Jun 1996

11.  Bengkel Penulisan Akademik / Saintifik , UTM 26 – 27 Ogos 1997

12.  Kursus Kaedah Penyelidikan, UTM 16 Mac – 18 April 1998

13.  Effective Consultancy, BATC, UTM KL, 1 – 3 November 2000

14.  Kursus Pembangunan Perisian Multimedia Pendidikan , UTM, 9 – 10 Februari 2000

15.  Kursus Audit Dalaman MS ISO 9000, Perbadanan Produktiviti Negara, 11- 12 Jun 2001

16.  Distinguish Microwave Lecture Program, IEE , UTM, 6 Ogos 2005

17.  1st International Computers, Communications & Signal Processing – (CCSP 2005), Renaissance Hotel KL, 14 – 16 Nov. 2005

18.  Kursus Tahap Kecekapan TK 3 Disember 2005

19.  Kursus Operasi Stokis, May First, 18 – 19 April 2006

20.  Kursus Microcontroller PIC, FKE, UTM, 5 – 6 September 2006

21.  Bengkel Mentographic Training Phase 2, CEDEC, USM, 7 – 10 Mei 2007

22.  Kursus Tahap Kecekapan TK 4 Jun 2009

23.  Intel-MDeC Advanced VLSI Train the Trainer Program 21- 26 June 2010

24.  Intel-MDeC Advanced VLSI Train the Trainer Program 22- 26 November 2010

25.   Kursus Penasihatan Akademik 14 - 15 Disember 2010

26. Power Integrity in Low-Power High-Speed Designs 10-11 November 20





















Curriculum Vitae 2009

1. PERSONAL INFORMATION

Name : ZULKIFLI BIN MD. YUSOF

Designation : Senior Lecturer

Citizenship : Malaysian

E-mail : zmdyusof@fke.utm.my

Telephone : 07-5535278 (office), 019-7526774 (hp)

Fax: : 07-5566272

Years of experience  : 20 years

 

2. ACADEMIC QUALIFICATION


December, 1993 Master of Science in Electrical Engineering,

Washington State University, Pullman, Washington, USA

Thesis: Electron Transport in Diamond

 

May, 1989 Bachelor of Science in Electrical Engineering,

 University of Arizona, Tucson, USA

Project: University of Arizona Network Transmission Line (UANTL) software development.

 

3. ADMINISTRATIVE POSTS

1. Head of Printed Circuit Board Lab, (1994 – 1999)

2. Head of Microelectronics Lab. (1996 - 1997)

3. Coordinator Subject Digital Electronics (2007 – 2010)

 

4. SUBJECT TAUGHT ( 14 years )

Postgraduate:

 1. Special Topic in Advanced Electronic (MEL 1243) (Master)

Undergraduate

1. Microelectronics

2. Electronic Computer Aided Design (ECAD)

3. Very Large Scale Integrated Circuits (VLSI)

4. Digital System Design

5. System Electronics

6. Electronics Circuits

7. Electronics Device

8. Digital Electronics

Diploma

1. Computer Engineering (

2. Electrical Engineering

3. Microprocessor 6800 

 

5. PROJECT SUPERVISION

1, Bachelor – 40 student

 

6. RESEARCH FUNDING (RECENT 4)

1. FRGS, VOT 78031 , Ministry of Higher Education : CAD Algorithm & Architecture in Physical Design System for Nano-scale VLSI Intergrated Circuits 2007, (Julai 2006 – Julai 2008) Researcher

2. eScience , PROJECT NO.: 01-01-06-SF0663 VOT 79361 : MOSTI : A PARTICLE SWARM OPTIMIZATION APPROACH FOR VLSI ROUTING (April 2009 –October 2010 ) Project Leader

3. FRGS/1/10/SG/UTM/03/10 (ST). AN IMPROVED VECTOR EVALUATED PARTICLE SWARM OPTIMIZATION (VEPSO) TO ACHIEVE GOOD QUALITY OF PARETO FRONTIER FOR MULTI-OBJECTIVE OPTIMIZATION 2010 (Mac 2010 – Feb. 2012) Researcher

4.Geran Penyelidikan Jangka Pendek UTM, The Study on the Contribution of Nearest Neighbour Thermodynamics Parameters to the DNA Sequences Generated by Ant Colony System (ACS) Algorithm ( May 2010 - November 2011 ) Project Leader

5. UPP Grant UTM , Multi-target microprocessor based System, , Januari 1990… hingga Disember 1990

 

7. PUBLICATIONS (SELECTED 10)

Journal (Internatioanl)

1. Muhammad Faiz Mohamed Saaid, Zuwairie Ibrahim, Zulkifli Md Yusof, Junzo Watada, “Automation of a DNA Computing Readout Method based on Real-Time PCR Implemented on a LightCycler System” ICIC International, Volume 6, Number 4,  April 2010

Conference (International)

1. M.A. Osman, Z.M.Yusof “Intervalley Diffusion in Diamond,” Transactions Second International High Temperature Electronics Conference, Charlotte, N. Carolina, Vol. 2, pp. 97- 102, June 1994.

2. Zulkifli M Yusof, David J Mulvaney, Jose L Nunez-Yanez and Vassillios A Chouliaras “ Compressed Memory Core”, Electronic Systems and Control Division Research Mini Conference, Loughborough, pp.50-51, 25 September 2003

3. Zulkifli Md Yusof , Mohamed Khalil-Hani, “System Level Modelling of Compressed Memory Architecture using systemC,” Int. Conf. on Robotics, Vision, Information and Signal Processing (ROVISP 2007), USM, Penang, pp. 354 - 358, 28-30 Nov 2007

4. Noor Khafifah Khalid, Tri Basuki Kurniawan, Zuwairie Ibrahim, Zulkifli Md Yusof, Marzuki Khalid, and Andries P. Engelbrecht, “A Model to Optimize DNA Sequences Based on Particle Swarm Optimization”, Asia International Conference on Modelling and Simulation, Kuala Lumpur, Malaysia, pp. 534-539 13-15 May 2008,

5. Zulkifli Md Yusof, Mohamed Khalil-Hani, Nasir Shaikh-Husin, and Mohamed Nadzir Marsono, “Iterative RLC Models for Interconnect Delay Optimization in VLSI Routing Algorithm,” The 6th Student Conference on Research and Development 26-27th November 2008

6. Z. Md-Yusof, M. Khalil-Hani, M. N. Marsono and N. Shaikh-Husin , “Optimizing Multi-Constraint VLSI Interconnect Routing” 12 th International Symposium on Integrated Circuits (ISIC 2009 ).14-16 Dec 2009

7. Asrul Adam, Amar Faiz Zainal Abidin, Zuwairie Ibrahim, Abdul Rashid Husain, Zulkifli Md Yusof and Ismail Ibrahim “A Particle Swarm Optimization Approach to Robotic Drill Route Optimization, “4th Asia Modelling Symposium 2008, Kota Kinabalu.,26-28 May 2010.

8. Z. Md.Yusof, C.-Y. Tan, A.-N. Wong, Z. Ibrahim, M. K. Hani and M. N. Marsono “Link-Fit and Lazy Fit Algorithms in Compressed Memory System, “4th Asia Modelling Symposium 2008, Kota Kinabalu.,26-28 May 2010

9. M. Nasir Ayob, Zulkifli Md Yusof, Asrul Adam,  Amar Faiz Zainal Abidin, Ismail Ibrahim, Zuwairie Ibrahim, N. Shaikh-Husin and M. Khalil Hani, " A Particle Swarm Optimization Approach for Routing in VLSI "  2 nd International Conference on Computational Intelligence , Communication System and Network 2010, Liverpool,  28 - 30 July 2010,

Conference (National)

1. Noor Khafifah Khalid, Zuwairie Ibrahim, Tri Basuki Kurniawan, Zulkifli Md Yusof, Marzuki Khalid, Nor Haniza Sarmin, and Andries P. Engelbrecht, “Single Objective Optimization of DNA Sequences based on Particle Swarm Optimization”, Prosiding Simposium Kebangsaan Sains Matematik ke-16, Kota Bharu, Kelantan, Malaysia, 2-5 Jun, 2008, pp. 412-420

 

8. CONSULTING AND INDUSTRIAL EXPERIENCE

  1. Coordinate Rakan Muda Program : Printed Circuit Board Development
  2. April-June 1995 ( 2 months)
  3. Coordinate Rakan Muda Program : Printed Circuit Board Development
  4. August-September 1995 ( 2 months)
  5. Represent Biro Innovasi & Perundingan UTM to Hong Kong institutional visit. 1996 ( 1 week)
  6. Represent Faculty to Toyama University , Japan and UTM exchange staff program 28 April – 27 May 1997.( 1 month)
  7. Coordinate MDEC Undergraduate Skills Programme : VLSI Digital System Design course. (May 2007) ( 1 month)
  8. Coordinate MDEC Undergraduate Skills Programme : VLSI Digital System Design course. (December 2007) ( 1 month)
  9. Coordinate Microelectronic and Computer Engineering (MiCE) Department Research /Project Discussion session in 2007
  10. Coordinate INTEL Elite Program : Technical and Softskill talks for electrical engineering students in 2007

 

9. CO-CURRICULAR AND PROFESSIONAL ACTIVITIES

  1. Secreatary of Surau Taman Senai Utama, 1998 – 2001
  2. Member of Faculty of Electrical Engineering Ping Pong team.1998 – till now
  3. Member of Faculty of Electrical Engineering Football team.1998 – 2000
  4. AJK Biro Sosial Masyarakat Melayu Loughborough 2002
  5. Member of Faculty of Electrical Engineering Veteren Football team.2007 – 2009
  6. Member of Jawatankuasa Info@FKE. 2007 – till now
  7. Track Chair for Asia International Conference on Modelling and Simulation May 2008 (AMS2008)
  8. Naib Pengerusi Kejiranan Kluster, Taman Pulai Indah, 2008.
  9. Naib Pengerusi Kejiranan Kluster, Taman Pulai Indah, 2009
  10. Naib Pengerusi Kejiranan Kluster, Taman Pulai Indah, 2010.
  11. AJK PIBG Sekolah. Kebangsaan Kangkar Pulai 2, 2009
  12. AJK PIBG Sekolah. Kebangsaan Kangkar Pulai 2, 2010
  13. AJK PIBG Sekolah. Menengah Kangkar Pulai, 2010
  14. Timbalan Pengerusi Surau Nurussalam, Taman Pulai Indah 2011 - 2012

 

10. COURSES AND SEMINAR ATTENDED

1. Kursus “ Current Trends in Wafer Processing Technology and Related Faiulre Mechanism,

2. MIMOS, PWTC 19 – 27 Julai 1990

3. 2nd International Microelectronics & System Conference ’91, MIMOS, PWTC 23 – 26 Julai 1991

4. Kursus “ VLSI Design “, FKE, UTM, 15 – 19 Julai 1991

5. Autologic Training , Mentographic , 24 – 26 September 1991

6. Cathedral – II : DSP Silicon Compiler, MIMOS, 29 – 31 Oktober 1991…………..

7. Kursus Bina Negara, Biro Tatanegara, Langkawi, 9 – 13 April 1994

8. VLSI BiCMOS Digital Circuit, MIMOS, 4 – 5 Julai 1994…………………..

9. 7th International Conference on Microelectronics – ICM ’95, MIMOS 19 – 21 Dis. 1995

10. Kursus Pengendalian CNC 020 Mesin dan PCB , UKM 3 -7 Jun 1996……..

11. Bengkel Penulisan Akademik / Saintifik , UTM 26 – 27 Ogos 1997……………………..

12. Kursus Kaedah Penyelidikan, UTM 16 Mac – 18 April 1998

13. Effective Consultancy, BATC, UTM KL, 1 – 3 November 2000

14. Kursus Pembangunan Perisian Multimedia Pendidikan , UTM, 9 – 10 Februari 2000

15. Kursus Audit Dalaman MS ISO 9000, Perbadanan Produktiviti Negara, 11- 12 Jun 2001

16. Distinguish Microwave Lecture Program, IEE , UTM, 6 Ogos 2005

17. 1st International Computers, Communications & Signal Processing – (CCSP 2005),

Renaissance Hotel KL, 14 – 16 Nov. 2005

18. Kursus Tahap Kecekapan TK 3 Disember 2005

19. Kursus Operasi Stokis, May First, 18 – 19 April 2006

20. Kursus Microcontroller PIC, FKE, UTM, 5 – 6 September 2006

21. Bengkel Mentographic Training Phase 2, CEDEC, USM, 7 – 10 Mei 2007

22. 2nd Asia International Conference on Modelling and Simulation, Kuala Lumpur, Malaysia, pp. 534-539 13-15 May 2008

23. Kursus Tahap Kecekapan TK 4 Jun 2009

24. 4th Asia Modelling Symposium 2010, Kota Kinabalu.,26-28 May 2010.

25. INTEL-MDeC ADVANCE VLSI TRAINING OF TRAINERS PROGRAM (FASA III) 21-26 June 2010

26. INTEL-MDeC ADVANCE VLSI TRAINING OF TRAINERS PROGRAM (FASA IV) 22-26 November 2010

Ċ
zulkifli md. Yusof,
Dec 2, 2011, 5:33 AM
Comments